40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2) (EFLA1040LB) by E-Flite

Codice prodotto: EFLA1040LB
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Normalmente Spedibile in 5 gg lavorativi
73.90€ iva inclusa

40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2) BY E-FLITE (EFLA1040LB)

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.


  • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges, use with a large variety of brushless motors
  • Amperage:  40-60
  • BEC Voltage:  2.5A continuous
  • Brake:  Yes
  • Continuous Maximum Current:  25 - 50A
  • Height:  0.47 in (12mm)
  • Input Connector Types:  13 AWG with E-flite EC3 Connector
  • Input Voltage:  3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd
  • Length:  2.6 in (66mm)
  • Momentary Peak Current:  55A
  • Output Connector Types:  16AWG with 3.5mm Female Gold Bullet Connectors
  • Type:  Brushless
  • Weight:  1.7 oz (48g)
  • Width:  1.2 in (31mm)
40-Amp Lite Pro Brushless ESC (V2) Manual.pdf1.06 MB

Prodotti più venduti