600 X Pro Series Kit (BLH5625) by Blade

Codice prodotto: BLH5625
Produttore: Blade
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile
599.99€
349.90€ iva inclusa

Fino esaurimento scorte

600 X Pro Series Kit by BLADE (BLH5625)

The Blade 600X is the newest addition to Blade’s Professional series of helicopters, designed for the discerning expert heli pilots.

The 600X makes the leap up from the 550X before it and into the highly competitive world of 600-size helicopters and the exacting world of advanced powerful 3-dimensional aerobatics.

Utilising the high performance Twin Vertical Plate design chassis of it’s smaller sibling, the 600X is immediately endowed with a proven rigid, lightweight core structure that provides the strength to deliver the responsive performance from a 12S Lithium battery powered transmission that today’s extreme 600-size heli 3D pilots demand.

Designed to accommodate two 6S LiPos to provide the 12S input voltage that the motor craves, the 600X chassis retains optimal lateral balance whilst providing the convenience and ease-of-charging for the pilot that 6S batteries enable.

An E-Flite 700-class 500Kv brushless motor is included to help guarantee exhilarating results in this 600-size heli and to provide the motive force to turn the 600mm Revolution cross-woven carbon-fibre main blades no matter how loaded they become during flight.

Direct-to-swash servo control further enhances the responsive nature of the 600X chassis whilst the triple bearing supported 10mm diameter main shaft transmits all the power to the main blades with minimal inertial lag thanks to its hollowed construction.

Drive is also transmitted efficiently to the tail via the torque tube – again, designed to minimize lag and optimize power delivery so that the 600X can pull through the most demanding of manoeuvres and routines with ease, allowing the pilot to fully concentrate without the unnecessary worry of whether their equipment is being pushed beyond its limits.

Lightweight materials, Low Part count and zero-flex design technologies are only a part of the story though. No matter how light a component is, its placement in the airframe can seriously affect the performance of the whole machine.

That’s why the Blade Professional Series engineers have worked incessantly to maintain both static and rotating mass as close to the centre of rotation as possible – thus reducing the 600X’s polar moment of inertia to an absolute minimum.

To the pilot and when in use, all this attention to detail translates into creating a machine that flies and reacts almost as fast as you can think. It might not be for the feint hearted but the 600X provides a near neural-like reflex reaction to any input it receives from the pilot.

The pre-painted fibreglass canopy provides aggressive styling cues to give the 600X that unmistakable ‘Blade’ family look and help produce a smart, sharp looking machine both on the ground or in the air.

Produced as a kit only and requiring assembly, the Blade 600X comes complete with the powerful E-Flite motor and BEC unit but leaves the choice of further electronics and radio equipment down to the individual pilot so that you can made tailored choices to suit your flying style and preferences.

Needed To Complete

  • 6+ channel transmitter and receiver radio system
  • Cyclic servos (3)
  • Tail servo (1)
  • 100–120 amp HV brushless ESC
  • Batteries (2 x 22.2V 6S 3200–4400mAh LiPo)
  • Charger
  • Flybarless control system

360° VIEW

 

 

 

  • Direct-to-swash, flybarless head design
  • Symmetrical carbon fiber main frames
  • CNC-machined aluminum head block and blade grips
  • CNC-machined aluminum swashplate
  • Revolution 600mm carbon fiber main blades
  • Revolution 95mm tail blades
  • Triple ball bearing-supported, 10mm solid steel main shaft
  • Integrated bearing block servo mount design
  • Torque-tube driven tail with aluminum tail boom and case
  • Dual-point tail pitch slider and balanced tail grips
  • E-flite® Heli 700, 500Kv brushless outrunner motor
  • Type:  600-class collective-pitch electric flybarless helicopter
  • Swashplate Type:  120-degree CCPM
  • Main Rotor Diameter:  52.8 in (1342mm)
  • Main Rotor Blade Length:  600mm
  • Main Blade Material:  Carbon fiber
  • Tail Rotor Diameter:  10.0 in (254mm)
  • Tail Rotor Blade Length:  95mm
  • Tail Blade Material:  Carbon fiber
  • Main Motor Size:  Helicopter 700-class, 500 Kv brushless outrunner
  • Battery:  (2) 22.2V 6S 3300mAh 30C+ LiPo
  • Speed Control:  100-amp high-voltage brushless (required)
  • Pinion Size:  18- to 20-tooth, (18T pinion included)
  • Main Gear Ratio:  8.88:1
  • Tail Drive:  Shaft
  • Length:  46.1 in (1170mm)
  • Height:  10.8 in (275mm)
  • Flying Weight:  8.35-8.80 lb (3.8-4.0 kg)
  • Approximate Flight Time:  4 minutes
  • Number of Channels:  6 channels
  • Is Assembly Required:  Yes
  • Size/Scale:  600
  • Rotor Type:  Collective Pitch Single Rotor
  • Experience Level:  Professional
  • Completion Level:  Kit
  • Recommended Environment:  Outdoor

Needed To Complete:

  • 6+ channel transmitter and receiver radio system
  • Cyclic servos (3)
  • Tail servo (1)
  • 100–120 amp HV brushless ESC
  • Batteries (2 x 22.2V 6S 3200–4400mAh LiPo)
  • Charger
  • Flybarless control system
AnteprimaAllegatoDimensione
BLH5625_Addendum.pdf153.64 KB
BLH5625-Manual_IT.pdf10.94 MB
BLH5625-Manual_EN.pdf10.84 MB

Prodotti più venduti