P3 Revolution 60cc ARF (HAN4630) by Hangar 9

Codice prodotto: HAN4630
Produttore: Hangar 9
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Spedibile in 5 giorni lavorativi
779.90€ iva inclusa

P3 Revolution 60cc ARF BY HANGAR 9 (HAN4630)

Overview

The Hangar 9® P3 Revolution 60cc giant scale biplane is an exclusively licensed model of the radical new aircraft design for Skip Stewart Airshows. Like the full-size, the outline of the P3 Revolution 60cc is unconventional in practically every aspect. The actual aircraft Skip Stewart will fly in the very near future gets its lightweight specifications from advanced composite construction. World-class RC pilot, Mike McConville, has engineered this model using lightweight all-wood construction. It’s a level of durability that’s critical to hardcore 3D performance in this size class, plus it allows genuine UltraCote® film to deliver a finish that’s resilient as it is beautiful.

One look at the enormous double-beveled control surfaces and it’s easy to tell this airplane was purpose built for outrageous 3D maneuverability. In contrast, the stretched fuselage and high-aspect ratio of its tapered wings suggests precision aerobatics is within the performance envelope. When matched with the recommended Spektrum electronics and 60cc-size gas engine, you can tune this unique biplane any way you like. You’ll get vertical pull to yank this big bipe out of a hover, and the precision to wail through crank-shaft rollers and hard snap in ways that would red-eye any pilot in the full-scale world.

Convenience features like plug-in wings and stabilizers mean that getting the P3 Revolution to the field is no problem. Completed features like factory-hinged ailerons and elevators, a pre-drilled firewall, and a complete high-quality hardware package mean you won’t be at the work bench very long. Even a pilot figure with the likeness of Skip Stewart is included so you can experience the future of airshow aerobatics right at your home field.

Exclusive License

The P3 Revolution 60cc model is produced with an exclusive license by Skip Stewart Airshows and features the same complex graphics as the original with a Genuine UltraCote® film finish. To top it off, even the included pilot figure looks like Skip Stewart.

Mike McConville Design

World class RC pilot, Mike McConville designed this model to offer breakthrough performance to 3D pilots looking for the advantages an advanced biplane design can deliver.

Plug-in Wings and Tail

The two-piece, plug-in wings feature carbon-fiber joiner tubes and tool-free I-strut installation. The two-piece, plug-in horizontal stabilizers also have a carbon-fiber joiner tube and simply bolt to the fuselage side.

Highly Pre-Fabricated

The all-wood structure features lightweight laser-cut construction with locations for all the accessories already cutout. To further speed the assembly process, hinges for the aileron and elevators have been factory installed.

Fiberglass Cowl and Wheel Pants

The fiberglass cowl and wheel pants color match the vibrant trim scheme. The landing gear is fabricated from high-strength aluminum and also have a matching black paint finish.

Complete Hardware Package

The high-quality hardware pack features heavy-duty ball-link connectors and dual-plate fiberglass control horns that help make final pushrod adjustments simple. Even the fuel tank is included.

 

Key Features

  • Designed by world class RC pilot, Mike McConville
  • Exclusive, officially licensed P3 Revolution model
  • Engineered to deliver 3D performance in a precision biplane platform
  • Two-piece, plug-in wings with carbon-fiber joiner tube
  • Two-piece, plug-in horizontal stabilizers with carbon-fiber joiner tube
  • Laser-cut, all-wood construction that’s lightweight
  • Pre-hinged ailerons and elevators (pre-drilled rudder)
  • Genuine UltraCote® film finish with complex graphics applied
  • Pre-drilled firewall that’s ready to mount your 60cc-size gas/petrol engine
  • Color-matching fiberglass cowl and wheel pants
  • Painted, high-strength aluminum landing gear
  • Complete, high-quality hardware pack, plus fuel tank included
  • Ball-link connectors and dual-plate fiberglass control horns
  • Painted pilot figure included

Needed To Complete

  • 6+ Channel, full-range transmitter and receiver
  • 60–70cc 2-stroke gas/petrol engine
  • 7 × High torque servos
  • 2 × Standard servos
  • 3 × Batteries for radio and engine ignition
  • 4.5-Inch spinner
  • Propeller

 

  • Completion Level: Almost Ready-to-Fly
  • Fuel Type: Gas
  • Material: Balsa Fiberglass
  • Wingspan: 78 in (1982mm)
  • Length: 78.7 in (2000mm)
  • Wing Area: 17 sq in (11723 sq cm)
  • Flying Weight: 19 lbs (8.6kg)
  • Engine Size: 62cc Gas
  • Airfoil Shape: Symmetrical
  • Minimum Required Radio: 6 channel
  • Servos: 7 high torque and 2 standard required
  • Recommended Receiver Battery: 2 × 2000mAh LiPo
  • Trimscheme Colors: Black, silver, true red
  • Spinner Size: 4.5 in (114mm)
  • Approximate Assembly Time: 20+ Hours

Needed To Complete

  • 6+ Channel, full-range transmitter and receiver
  • 60–70cc 2-stroke gas/petrol engine
  • 7 × High torque servos
  • 2 × Standard servos
  • 3 × Batteries for radio and engine ignition
  • 4.5-Inch spinner
  • Propeller

 

Aluminum Engine Standoffs: P3 60cc (HAN463018...

24.90€
Produttore: Hangar 9
Codice: HAN463018
Spedibile in 5 giorni lavorativi

Ball Link Set: P3 60cc (HAN463021)

24.90€
Produttore: Hangar 9
Codice: HAN463021
Spedibile in 5 giorni lavorativi

Bottom Wing Set: P3 60cc (HAN463004)

219.90€
Produttore: Hangar 9
Codice: HAN463004
Spedibile in 5 giorni lavorativi

Carbon Fiber Stabilizer Tube: P3 60cc (HAN463...

24.90€
Produttore: Hangar 9
Codice: HAN463007
Spedibile in 5 giorni lavorativi

Carbon Fiber Wing Tube Set: P3 60cc (HAN46300...

41.90€
Produttore: Hangar 9
Codice: HAN463008
Spedibile in 5 giorni lavorativi

Decal Set: P3 60cc (HAN463024)

17.90€
Produttore: Hangar 9
Codice: HAN463024
Spedibile in 5 giorni lavorativi

Fuselage Hatch with Canopy: P3 60cc (HAN46300...

57.90€
Produttore: Hangar 9
Codice: HAN463002
Spedibile in 5 giorni lavorativi

Fuselage with Hatch: P3 60cc (HAN463001)

429.90€
Produttore: Hangar 9
Codice: HAN463001
Spedibile in 5 giorni lavorativi

Gas Tank: P3 60cc (HAN463015)

32.90€
Produttore: Hangar 9
Codice: HAN463015
Spedibile in 5 giorni lavorativi

I-Strut Set: P3 60cc (HAN463016)

31.90€
Produttore: Hangar 9
Codice: HAN463016
Spedibile in 5 giorni lavorativi

Linkage Set: P3 60cc (HAN463022)

14.90€
Produttore: Hangar 9
Codice: HAN463022
Spedibile in 5 giorni lavorativi

Main Axle Set: P3 60cc (HAN463013)

10.90€
Produttore: Hangar 9
Codice: HAN463013
Spedibile in 5 giorni lavorativi

Main Wheel Set: P3 60cc (HAN463012)

15.90€
Produttore: Hangar 9
Codice: HAN463012
Spedibile in 5 giorni lavorativi

Painted Cabane Struts: P3 60cc (HAN463017)

44.90€
Produttore: Hangar 9
Codice: HAN463017
Spedibile in 5 giorni lavorativi

Painted Cowl: P3 60cc (HAN463010)

78.90€
Produttore: Hangar 9
Codice: HAN463010
Spedibile in 5 giorni lavorativi

Painted Landing Gear: P3 60cc (HAN463011)

33.90€
Produttore: Hangar 9
Codice: HAN463011
Spedibile in 5 giorni lavorativi

Painted Pilot Figure: P3 60cc (HAN463025)

20.90€
Produttore: Hangar 9
Codice: HAN463025
Spedibile in 5 giorni lavorativi

Painted Wheel Pant Set: P3 60cc (HAN463009)

47.90€
Produttore: Hangar 9
Codice: HAN463009
Disponibile in 5 giorni lavorativi

Rudder Cable Set: P3 60cc (HAN463020)

13.90€
Produttore: Hangar 9
Codice: HAN463020
Spedibile in 5 giorni lavorativi

Rudder: P3 60cc (HAN463006)

104.90€
Produttore: Hangar 9
Codice: HAN463006
Spedibile in 5 giorni lavorativi

Screw Set: P3 60cc (HAN463023)

20.90€
Produttore: Hangar 9
Codice: HAN463023
Spedibile in 5 giorni lavorativi

Stabilizer Set: P3 60cc (HAN463005)

120.90€
Produttore: Hangar 9
Codice: HAN463005
Spedibile in 5 giorni lavorativi

Tailwheel Assembly: P3 60cc (HAN463014)

24.90€
Produttore: Hangar 9
Codice: HAN463014
Spedibile in 5 giorni lavorativi

Throttle/Choke Servo Mounts: P3 60cc (HAN4630...

8.90€
Produttore: Hangar 9
Codice: HAN463019
Spedibile in 5 giorni lavorativi

Top Wing Set: P3 60cc (HAN463003)

239.90€
Produttore: Hangar 9
Codice: HAN463003
Spedibile in 5 giorni lavorativi

Prodotti più venduti