Beast 60e ARF (EFL9000) by E-Flite

Codice prodotto: EFL9000
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Spedibile in 5 giorni lavorativi
479.90€ iva inclusa

Beast 60e ARF by E-flite (EFL9000)

When it was first introduced the 100cc Beast from Hangar 9 was an instant hit with model flyers around the world and rightly so; this giant scale biplane had both style and performance in abundance.

Now following on from the initial success of the earlier model and numerous requests from modellers around the world for a smaller version, E-flite have introduced an all electric powered Beast combining great looks and performance.

The Beast 60e features traditional balsa and light plywood construction, and thanks to careful engineering by David Payne and Quique Somenzini retains the same great flying characteristics of the larger Hangar 9 version. Achieving an excellent power-to-weight ratio gives the model the superb handling and aerobatic characteristics of its larger Hangar 9 cousin.

The motor cowling, battery hatch and wheel spats are fibreglass and come pre-painted to match the Ultracote™ copyrighted colour scheme that was first created on the full-size aircraft by Mirco Pecorari of Italy; duplicating exactly the iconic full-size Beast as flown by top display pilot the late Bryan Jensen.

During the design stages a great deal of attention was paid to the construction of the model, and in particular ease of use, accessibility and assembly. The fuselage features a large fibreglass magnetic battery hatch that provides easy access to flight batteries and other running gear. Unusually for a biplane, assembly at the flying field is simple. Just 4 bolts and 4 pins have the model assembled, making a pleasant change as most biplanes usually require much more attention each time they are disassembled for transport or storage.

Servo placements have been carefully made to optimise mechanical advantages on the control surfaces, resulting in crisper response to command inputs.

By using the same slim airfoil section as the 100cc Beast the model delivers rock steady aerobatic performance throughout the flight envelope, combined with good slow speed handling. On the ground the steerable tail wheel and relatively wide landing gear give the model impeccable handling.

Powered by the recommended E-flite Power 60 470Kv brushless outrunner motor the model has superb vertical performance whilst a 6S 4400 - 5000 LiPo flight battery ensures that there is more than enough power and duration.

On the ground the Beast is stunning model to look at; in the air the Beast is quite simply, awesome!

 

Needed To Complete

  • 6+ channel transmitter and radio system
  • (4) mini servos and (2) standard servos
  • 60-size brushless outrunner motor
  • Propeller
  • 3-inch parabolic (P-51 style) spinner
  • 80-amp brushless ESC
  • 22.2V 6S 4400-5000mAh 30C LiPo flight batter
  • Charger for flight battery
  • Pilot figure (optional)

 

  • Lightweight laser-cut balsa and plywood construction
  • High power-to-weight ratio with 3D capability
  • Fast four-screw and four-pin field assembly
  • Two-piece, plug-in wings with carbon joiner tube
  • Ready-to-mount the recommended high-output E-flite® Power 60, 470Kv motor
  • Large magnetic nose hatch provides ample access to battery and electronics
  • Independent and simple direct-link servo installation
  • Steerable tailwheel and quality hardware package
  • Large control surfaces with double-beveled hinge lines
  • Genuine Hangar 9® UltraCote® covering
  • Pre-painted fiberglass cowling and wheel pants
  • Durable aluminum landing gear with painted finish
  • Wingspan:  57.0 in (145 cm)
  • Overall Length:  57.5 in (146 cm)
  • Wing Area:  1100 sq. in. (71.0 sq. dm.)
  • Flying Weight:  8.90-9.55 lb (4.05-4.35 kg)
  • Motor Size:  60-size brushless outrunner
  • Radio:  6+ channel radio system
  • Servos:  (2) ultra torque standard, (4) ultra torque mini servos
  • Trim Scheme Colors:  UltraCote Black (U874), True Red (U866), Gold (U879)
  • CG (Center of Gravity):  4-1/2 to 4-15/16 in (115-125mm) back from the center of top wing
  • Prop Size:  17 x 7e
  • Spinner Size:  3.0 inch P-51 style
  • Speed Control:  80-amp brushless
  • Recommended Motor Battery:  22.2V 6S 4400-5000mAh LiPo
  • Flaps:  No
  • Retracts:  No
  • Control Throw (Ailerons):  Low: 1-3/4 in (45mm) up/down, 10% expo; High: 2-15/16 in (75mm) up/down, 30% expo
  • Control Throw (Elevator):  Low: 2-15/16 in (75mm) up/down, 10% expo; High: 5-1/8 in (130mm) up/down, 30% expo
  • Control Throw (Rudder):  Low: 3-3/4 in (95mm) right/left, 10% expo; High: 4-1/2 in (115mm) right/left, 30% expo
  • Main Wing Tube Length:  22.9 in (582mm)
  • Main Wing Tube OD:  16mm O.D.
  • Is Assembly Required:  Yes
  • Plane Type:  Aerobatic & 3D
  • Experience Level:  Intermediate
  • Power Plant Size:  60-110 Electric
  • Recommended Environment:  Outdoor
  • Fuel Type:  Electric

Needed To Complete

  • Radio Gear SPMAR635  AR635 6-channel AS3X sport receiver (recommended)
  • SPMAR8000  AR8000 8-channel DSMX® receiver (optional)
  • SPMSP3021 (3)  Heavy-duty servo arm
  • JRPA900  MatchBox™ servo matching/power system (only one required with the AR635 receiver)
  • SPMSA6260 (2)  A6260 HV digital hi-torque MG aircraft servo, elevator and rudder
  • SPMSA5060 (4)  A5060 Mini HV digital torque MG aircraft servo, ailerons
  • SPMA3001 (3)  Heavy-Duty Servo Extension 6-inch (speed control, bottom ailerons to MatchBox)
  • SPMA3003 (2)  Heavy-duty servo extension 12-inch (top center section aileron, left and right)
  • SPMA3004 (2)  Heavy-duty servo extension 18-inch (rudder and elevator)
  • Power 60 System
  • EFLM4060B  Power 60 Brushless Outrunner motor, 470Kv
  • EFLA1080B  80-Amp Pro Switch-Mode BEC brushless ESC, EC5™ (V2)
  • EFLB44006S30  4400mAh 6S 22.2V 30C LiPo,10AWG EC5™ connector
  • EFLM1934  Prop adaptor: Power 46/52/60
  • APC17070E  Electric propeller, 17 X 7E
  • HAN99004  3-inch aluminium spinner P-51
  • HAN99052  8 x 1.25mm prop adaptor kit

Optional parts   

  • HAN368  25–28% painted pilot helmet red/white/blue
  • EFLA110  Power meter
  • EFLC3020  Celectra™ 200W DC charger
AnteprimaAllegatoDimensione
EFL9000-Manual.pdf11.13 MB

Covering Glove (HAN150)

10.90€
Produttore: Hangar 9
Codice: HAN150
Disponibile

Cowl Hatch: Beast 60e ARF (EFL900006)

36.90€
Produttore: E-Flite
Codice: EFL900006
Spedibile in 5 giorni lavorativi

Electric Propeller, 17 x 8E (APC17080E)

12.90€
Produttore: APC Propellers
Codice: APC17080E
Disponibile

Hardware Set: Beast 60e ARF by E-flite (EFL90...

22.90€
Produttore: E-Flite
Codice: EFL900015
Spedibile in 5 giorni lavorativi

Landing Gear: Beast 60e ARF (EFL900010)

22.90€
Non disponibile
Produttore: E-Flite
Codice: EFL900010
Non disponibile

Lower Hatch: Beast 60e ARF (EFL900007)

12.90€
Produttore: E-Flite
Codice: EFL900007
Spedibile in 5 giorni lavorativi

Outer Wing Strut Mounts: Beast 60e ARF (EFL90...

9.90€
Non disponibile
Produttore: E-Flite
Codice: EFL900012
Non disponibile

Pushrod Set: Beast 60e ARF by (EFL900016)

12.90€
Produttore: E-Flite
Codice: EFL900016
Spedibile in 5 giorni lavorativi

Tail Wheel Assembly: Beast 60e ARF (EFL900014...

12.90€
Non disponibile
Produttore: E-Flite
Codice: EFL900014
Non disponibile

Top Wing Set with Aileron L&R: Beast 60e ...

179.90€
Produttore: E-Flite
Codice: EFL900002
Spedibile in 5 giorni lavorativi

Wheel Pants: Beast 60e ARF (EFL900011)

22.90€
Non disponibile
Produttore: E-Flite
Codice: EFL900011
Non disponibile

Wheels 65mm: Beast 60e ARF (EFL900013)

9.90€
Produttore: E-Flite
Codice: EFL900013
Spedibile in 5 giorni lavorativi

Wing Strut Set: Beast 60e ARF (EFL900005)

30.90€
Produttore: E-Flite
Codice: EFL900005
Spedibile in 5 giorni lavorativi

Prodotti più venduti