Theory XL 5" FPV Kit (BLH9470) by Blade

Codice prodotto: BLH9470
Produttore: Blade
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Spedibile in 5 giorni lavorativi
49.90€ iva inclusa

Theory XL 5" FPV Kit BY BLADE (BLH9470)


The Blade® Theory™ XL Frame Kit is a new and vastly improved FPV frame kit. This "stretched X" design delivers flight characteristics that are perfect for FPV racing, increased stability while pitching and flying fast forward. The durable 4mm carbon fiber main plate offers the lightweight durability that every FPV Racer desires. Weighting in at under 80 grams, this frame sheds all necessary weight without sacrificing durability and space. The bottom plate features designated cutouts to run the battery strap below the quad, reinforced arm tips to protect the motors in a crash, and industry standard 30.5mm standoff cutouts to mount nearly any power distribution board or flight controller. The 30mm standoffs that separate the bottom plate from the top also offer plenty of room to mount electronics such as receivers, video transmitters, or lap timing systems in addition to the flight controller and power distribution board. Additionally, the top plate has patterned cutouts that allow for easy access to nearly all video transmitters. Two vertical pieces of carbon fiber create a versatile and durable camera mount that offers 0 to 90 degrees of tilt, perfect for HS1177 style cameras. Motor mounting holes can host a variety of dimensions, from 16mm to 19mm motors. The Theory™ XL is the perfect FPV racing frame for every pilot, from the intermediate backyard flyer, to the national competitors.

Please note: Gallery photos show a completed kit for visual purposes. The electronics and accessories are not included.


Key Features

  • Stretched X Design for better flight stability
  • Durable 4mm Carbon Fiber
  • 16mm & 19mm motor mounts
  • 30.5mm PDB & Flight controller mounting dimensions
  • 30mm standoffs offering ample room for electronics
  • Carbon fiber camera mounts for HS1177 style FPV cameras
  • Main frame cutouts for under-quad battery strap
  • Top plate designed for optimal video transmitter access
  • Frame designed for motor protection


  • Approximate Assembly Time: 1-3 Hours
  • Completion Level: Kit
  • Flying Weight: 440g
  • Height: 36mm
  • Length: 158mm
  • Main Frame Material: Carbon Fiber
  • Material: Carbon Fiber
  • Rotor Type: Quadcopter
  • Type: Multirotor kit
  • Width: 125mm

Needed To Complete

  • (1) Transmitter/Receiver
  • (1) FPV Camera
  • (1) Video Transmitter
  • (1) Flight Control
  • (4) ESCs
  • (4) Motors
  • (1) Battery
  • (1) Video Antenna
  • (1) Power Distribution Board
  • (4) Propellers
  • (1) 1.5mm Hex Wrench
  • (1) 2mm Hex Wrench
  • (1) Thread lock
  • (1) XT60 or EC3 connector

5x4 FPV Race Prop 3Blade Green (BLHA1003)

Non disponibile
Produttore: Blade
Codice: BLHA1003
Non disponibile

DSMX Quad Race Serial Receiver with Telemetry...

Produttore: Spektrum
Codice: SPM4649T
Spedibile in 5 giorni lavorativi

Focal FPV Wireless Headset with Diversity (SP...

Non disponibile
Produttore: Spektrum
Codice: SPMVR2510
Non disponibile

Hex Driver: 1.5mm (DYN2814)

Produttore: Dynamite RC
Codice: DYN2814
Spedibile in 5 giorni lavorativi

Hex Driver: 2mm (DYN2815)

Produttore: Dynamite RC
Codice: DYN2815
Spedibile in 5 giorni lavorativi

Machined Hex Driver, 1.5mm (DYNT2031)

Non disponibile
Produttore: Dynamite RC
Codice: DYNT2031
Non disponibile

Nylon Standoffs and Hardware Set for Drone Ra...

Produttore: Spektrum
Codice: SPMVX180
Spedibile in 5 giorni lavorativi

Quad Racer Tool Set (BLHA1011)

Produttore: Blade
Codice: BLHA1011
Spedibile in 5 giorni lavorativi

Thrust™ 2205-2650Kv FPV Racing Motor (BLHA1...

Produttore: Blade
Codice: BLHA1022
Spedibile in 5 giorni lavorativi

Prodotti più venduti