5-Amp Pro Brushless ESC by E-Flite

Codice prodotto: EFLA1005
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile
21.90€ iva inclusa

The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps when The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps whenusing 2 Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.

  • Up to 5-amp continuous current with proper air flow
  • Drives up to 4 sub-micro servos on 2S
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low-voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Soft start
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
  • Brake: Yes - Programmable
  • Continuous Maximum Current: 5A
  • Momentary Peak Current: 6A (15 sec)
  • Length: 1.0 in (25mm)
  • Width: 0.67 in (17mm)
  • Height: 0.27 in (7.0mm)
  • Weight: 0.28 oz (8g)
  • Wire Gauge: 22AWG with JST connector on battery input leads or 22AWG with 2mm female gold bullet connectors on motor output leads
  • Cells w/BEC: 2–3S Li-Po or 6–7 cell Ni-MH/Ni-Cd
AnteprimaAllegatoDimensione
E-flite5AProESCinstructions.pdf1.19 MB

Prodotti più venduti